Acurator Accessories –  Pneumatic Fittings

Pneumatic Fittings

Miniature Pneumatic Fittings SPC

SPC Miniature Pneumatic Fittings is a quick connector mainly used for air piping and pneumatic tools. It can realize the connection or disconnection of pipeline without tools.

  • DIA: Φ4,Φ6,Φ8,Φ10,Φ12,Φ14,Φ16
  • Size: 1/8″,1/4″,3/8″,1/2″
  • Max. Operating Pressure: 1.32MPa(13.5kgf/cm²)
  • Ambient and fluid temperature: 0~60℃

One Touch Fittings JJSC

  • Port Size: M5,R(2)1/8,R(2)1/4,R(2)3/8,R(2)1/2

Quick Twist Joint KL

  • Port Size: M5,R(2)1/8,R(2)1/4,R(2)3/8,R(2)1/2

Metal Pneumatic Fittings KTC

The Pneumatic Quick Fittings NRC is a kind of connecting piece mainly used for pneumatic tools and air piping to realize pipeline connection.

  • Max. Proof Pressure: 1.32MPa(13.5kgf/cm²)
  • Max. Operating Pressure: 0~0.9MPa(0~9.2kgf/cm²)
  • Ambient and fluid temperature: 0~60℃
  • Applicable Hose: PU hose, nylon tube

Rotary Joint SMQR

  • Proof Pressure: 1.32MPa(1.35kgf/cm²)
  • Max. Operating Pressure: 0~0.9MPa(0~9.2kgf/cm²)
  • Ambient and fluid temperature: 0~60℃
  • Applicable Hose: PU hose, nylon tube

Quick Twist Fittings KG

The Metal Pneumatic Fittings KTC is a kind of connecting piece mainly used for pneumatic tools and air piping to realize pipeline connection.

  • Proof Pressure: 1.32MPa(1.35kgf/cm²)
  • Max. Operating Pressure: 0~0.9MPa(0~9.2kgf/cm²)
  • Ambient and fluid temperature: 0~60℃
  • Applicable Hose: PU hose, nylon tube

Air Pneumatic Connector KQ

QR type rotary joint adopts imported mechanical seal combined with a silicon carbide ring. The auxiliary seal is made of Japanese silicone rubber.

  • Port Size: Male R1/8,Female M5×0.8
  • Min. Operating Pressure: -100kPa
  • Max. Operating Pressure: 1.0MPa
  • Ambient and Fluid Temp: -10~80℃

Pneumatic Couplings Fittings KS

* Can be used on vacuum systems.* The metal part is made of stainless steel (SUS303) instead of the traditional brass.* Suitable for the following purposes

Coupling Quick Joint KKA

  • * Black Air Pneumatic Connector KQ can be used on vacuum systems.
  • * Plastic part use black material, good anti-fouling performance.
  • * Standard thread with sealant.

Pneumatic Connector KGQ

QR type rotary joint adopts imported mechanical seal combined with a silicon carbide ring. The auxiliary seal is made of Japanese silicone rubber.

  • Built-in bearing, rotate freely around the middle shaft for 360° high speed rotation;
  • Basic material: copper;
  • Thread: M5×0.8,M6×1.0,1/8″,1/4″,3/8″,1/2″
  • Maximum working pressure: 1.0MPa

Metal Pneumatic Fittings KCH

  • Operating Pressure Range: KKA3:-100kPa~1.0MPa
  • Ambient and fluid temperature: -5~100℃ (No Freezing)
  • Lubrication: No Lubrication
  • Material: Metal part: SUS304, sealing ring: FKM

In-line Vacuum Generator ZU

The plug-in Pneumatic Connector can be used in conjunction with the PA, PU and PE hoses, and connect the cylinder and the air valve, start logic element on the compressed air circuit.

Shoes Machinery Joint DT

Features: When disassembling the hose, the air can be prevented from flowing out of the joint,Basic material: copper

Air Pneumatic Fittings M

  • * Pipe type design, no special installation.
  • * Standard with quick change joint, easy to connect pipe.
  • * Use resin as the material, light weight.
  • * The standard model has no copper type.

Shoes Machinery Joint DT

Air Pneumatic Fittings M

  • Cylinder dimensions: Φ3.18(O.D)×Φ2.18(I.D), Φ4×Φ2.5, Φ6×Φ4.
  • Operating Pressure: 0~1.0MPa
  • Thread Size: M3×0.5, M5×0.8, R1/8