Pumping Element – 1R / 2R

Pumping Element Assembly for 1R / 2R. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery.

DOWNLOAD BROUCHER
REQUEST A QUOTE

Pumping Element – 11R / 12R

Pumping element for 11R / 12R series PUMPS.

Commissioning of Pumps Model: 1RC / 1RCE and 11RC / 11RCE – Download

Commissioning of Pumps Model: 2RC / 2RCE and 12RC / 12RCE – Download

Radial Piston Pumps – 1R2

Rugged low cost pumps with all parts renewable by replacement. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft. For coupling the pumps to the electric motors standard bell housing assemblies are available. available with two pumping elements.

Nominal pressure and flow ratings
Pr. bar 550 450 350 300 250 200
No. of Pumping
Elements
Flow (l / min) @ 1450 rpm
A B C D E F
2 1 1.66 2.46 2.86 3.33 3.86

Radial Piston Pumps – 1R3

Rugged low cost pumps with all parts renewable by replacement. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft. For coupling the pumps to the electric motors standard bell housing assemblies are available. Available with three pumping elements.

Nominal pressure and flow ratings
Pr. bar 550 450 350 300 250 200
No. of Pumping
Elements
Flow (l / min) @ 1450 rpm
A B C D E F
3 1.5 2.5 3.7 4.3 5 5.8

Radial Piston Pumps – 1R / 1RE

Rugged low cost pumps with all parts renewable by replacement. Radial piston arrangement, with 3, 5 or 7 pumping elements. Oil immersed type, open execution, face mounting, valve controlled, fixed delivery, bi-directional rotation of shaft. Also available with extension shaft / bracket for through drive. For coupling the pumps to the electric motors standard bell housing assemblies are available. These are also available with extension shaft to couple low pressure pumps.

Nominal pressure and flow ratings
Pr. bar 550 450 350 300 250 200
No. of Pumping
Elements
Flow (l / min) @ 1450 rpm
A B C D E F
3 1.5 2.5 3.7 4.3 5 5.8
5 2.6 4.2 6.2 7.2 8.4 9.7
7 3.7 5.8 8.6 10 11.7 13.6

Radial Piston Pumps – 1RC / 1RCE

Radial piston arrangement, with 3, 5 or 7 pumping elements. external mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange.

Nominal pressure and flow ratings
Pr. bar 550 450 350 300 250 200
No. of Pumping
Elements
Flow (l / min) @ 1450 rpm
A B C D E F
3 1.5 2.5 3.7 4.3 5 5.8
5 2.6 4.2 6.2 7.2 8.4 9.7
7 3.7 5.8 8.6 10 11.7 13.6

Radial Piston Pumps – 2R

Radial piston arrangement, with 3, 5 or 7 Pumping elements each per pump section. Fixed delivery, Oil immersed type, Open execution, face mounting, Valve controlled. Bi-directional rotation of shaft.

Flows can be combined internally, externally to feed one circuit or used independently to feed Two circuits.

Nominal pressure and flow ratings
Pr. bar 550 450 350 300 250 200
No. of Pumping
Elements
Flow (l / min) @ 1450 rpm
A B C D E F
3 1.5 2.5 3.7 4.3 5 5.8
5 2.6 4.2 6.2 7.2 8.4 9.7
7 3.7 5.8 8.6 10 11.7 13.6

Radial Piston Pumps – 2RC / 2RCE

Radial piston arrangement, with 3, 5 or 7 pumping elements. External mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange.

Flows can be combined internally, externally to feed one circuit or used independently to feed Two circuits.

Nominal pressure and flow ratings
Pr. bar 550 450 350 300 250 200
No. of Pumping
Elements
Flow (l / min) @ 1450 rpm
A B C D E F
3 1.5 2.5 3.7 4.3 5 5.8
5 2.6 4.2 6.2 7.2 8.4 9.7
7 3.7 5.8 8.6 10 11.7 13.6

Radial Piston Pump – 11R

Radial piston arrangement, with 5 or 7 pumping elements. Oil immersed face mounting. Valve controlled. Fixed delivery. Bi-directional rotation of shaft. With extension shaft for through drive. Available with extension bracket assembly for coupling a low pressure pump having standard flange.

Nominal pressure and flow ratings
Pr. bar 400 315 250
No. of Pumping
Elements
Flow (l / min) @ 1450 rpm
A B C
5 10.6 13.8 17.5
7 14.8 19.5 24.5

Radial Piston Pump – 11RC

Radial piston arrangement, with 5 or 7 pumping elements. External mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange.

Nominal pressure and flow ratings
Pr. bar 400 315 250
No. of Pumping
Elements
Flow (l / min) @ 1450 rpm
A B C
5 10.6 13.8 17.5
7 14.8 19.5 24.5

Radial Piston Pump – 12R

Radial piston arrangement, with 5 or 7 pumping elements each per pump section. Oil immersed face mounting. Valve controlled. Fixed delivery. Bi-directional rotation of shaft. With extension shaft for through drive. Available with extension bracket assembly for coupling a low pressure pump having standard flange.

Nominal pressure and flow ratings
Pr. bar 400 315 250
No. of Pumping
Elements
Flow (l / min) @ 1450 rpm
A B C
5 10.6 13.8 17.5
7 14.8 19.5 24.5

Radial Piston Pump – 12RC

Radial piston arrangement, with 5 or 7 pumping elements each per pump section. External mounting type. Face mounting, Valve controlled, Fixed delivery. Bi-directional rotation of shaft. Available with extension shaft for through drive. With extension bracket assembly for coupling a low pressure pump having standard flange.

Nominal pressure and flow ratings
Pr. bar 400 315 250
No. of Pumping
Elements
Flow (l / min) @ 1450 rpm
A B C
5 10.6 13.8 17.5
7 14.8 19.5 24.5

Bell Housing Assembly – BH (ISO)

The bell housing series BH are designed for coupling hydraulic pumps having ISO flanges to electric motors having metric flanges.
The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled.

Mounting Position Axis of the assembly can be mounted in any direction
Pump mounting flange As per ISO 3019/1-1975(E)
Motor mounting flange As per IS 2223/IEC 72-2
Flexible coupling Spider-type.

Bell Housing Assembly (Factory Standard) – BHP

The bell housing series BHP are designed for coupling hydraulic pumps having flanges to electric motors having metric flanges. These bell housings are precisely machined to reduce misalignment of coupled shafts. The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled. The construction also reduces the noise generation considerably.

Extension Bracket Assembly – EB

The bell housing series EB are designed for coupling hydraulic pumps having ISO flanges to electric motors having metric flanges. These bell housing are precisely machined to reduce misalignment of coupled shafts. The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled. The construction also reduces the noise generation considerably.

Hand Pumps – HP12 & HP16

Heavy duty construction. Renewable internal parts by replacement. Integral Relief and Release valves. Collapsible hand movement at low pressure.

Nominal pressure and flow ratings
Model Max. working
pr. (bar)
Flow capacity
c.c./stroke
Oil tank
capacity (ltrs.)
HP12
HP16
HP12-1000
700
350
1000
2.8
5
2.8
1.2

Hand Pumps with Rotary Directional Control Valves – HP*-D

The bell housing series EB are designed for coupling hydraulic pumps having ISO flanges to electric motors having metric flanges. These bell housing are precisely machined to reduce misalignment of coupled shafts. The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled. The construction also reduces the noise generation considerably.

Hand Pumps (Tank Side Mounting) – HPTS12, HPTS16 & HPTS12-1000

Hand pumps series HPTS** are identical in specifications to series HP** pumps, except that, these pumps are meant for mounting on the side wall of oil reservoir / tank of a hydraulic system and therefore can be integrated into the main system as a stand-by pump or can be used as a power source for cylinders or jacks which need large volume of oil for their actuation by mounting them on side wall of suitably designed oil tank.

Feed and Power Hand Pumps – HP5012 & HP5016

Automatic change-over from high discharge at low pressure to low discharge at high pressure. Renewable internal parts by replacement. Collapsible Hand lever for compact size and short hand movement.

FEED AND POWER HAND PUMP Model : HP5012**D / HP5016**D

These hand pumps are provided with integrated Rotary Directional Control Valves with two outlet ports for switching of the hand pump power between the two sides of a double acting cylinder.

Feed and Power Hand Pumps (with small tank) – HP5012-ST & HP5016-ST

Automatic change-over from high discharge at low pressure to low discharge at high pressure. Renewable internal parts by replacement. Collapsible Hand lever for compact size and short hand movement.