2W(UD) Valve (Small Orifice)

2W series small oriffice solenoid valve, also known zero-pressure solenoid valve, the initial state for normally closed, normally open only available for below 3/8����, thread size range from 1/8���� to 3/8����, Din connector type and flying leads type, anti-explosion and anti-water coil are available. With the stalbe quality and wide application, 2W valve is popular with customers, especially in the water treatment system, the 2W valve is used widely.

Download Brochure
Request a Quote

2W(UW) Valve(Big Orifice)

2W series direct acting solenoid valve with big oriffice type, thread size range from 3/8���� to 2����, oriffice size range from 16mm to 50mm, with thread pipe connection and flange connection types. Din connector type and flying leads type, anti-explosion and anti-water coil are available. The initial state for normally closed, normally open only for oriffice with 16mm, 20mm and 25mm. With the stable function and extensive application, 2W valve is popular with customers.

2L(US) High-Temperature Solenoid Valve

2L series 2/2 pilot steam solenoid valve, thread size range from 3/8���� to 2����, withstand the high temperature of 180 centidegree, because of the control of steam, so called steam valve. Accordingly,,the working pressure is enhanced up to 15 bar, the oriffice is also maken bigger to increase the velocity. With the stable performance, 2L valve is widely used in the field of steam control all over the world.

2S Series Stainless Steel Solenoid Valve

2S series stainless steel solenoid valve, thread size range from 1/8���� to 2����, body materials is S.S.316, good anticorrosive ability, sealing materials have NBR, EPDM and VITON, high temperature type is available. Din connector and flying leads types, anti-explosion and anti-water type coil are available. Suitalbe for the medium of air, water, oil and gas. Because of the high stable performance, 2S valve is well known in this field.

SLP Series Solenoid Valve

Normal close,available body:brass,SS316 Multiple seals are available for different medium Wide size range from 1/8″ to 2″,with both thread and flange connection Diaphragm pilot solenoid valve,with lower working pressure

2P Series Solenoid Valve

2P series solenoid valve is the direct acting type with normally closed, oriffice is 2.5mm, body materials is engineering plastic, small dimension, wide application. With many year experience of the technology, VPC can meet the customers�� requirements in the processing of valve body and coil, sealing materials etc. 2P series valve have many advantages, such as competitive price, stable quality and long life.

2V Series Solenoid Valve

2V series solenoid valve have two working type, direct acting type( from 1/8���� to 1/4����) and pilot solenoid valve(from 3/8���� to 1����). Compact design, cheap price, low energy consumption, up to 10 bar, withstand the high temperature of 130 centidegree equiped with VITON sealing. 2V series solenoid valve is widely used in the control of air system.

VX Series Solenoid Valve

VX series solenoi valves, range from 1/8���� to 1/2����, equiped with flying leads type coil, zero-pressure start, normally closed, withstand the pressure up to 10 bar. VX series solenoid valves are widely used in the air control system and water control system. Also can be suitable for steam if change the seal materials.

PU Series Solenoid Valve

PU series solenoid valves have two types, PU220 direct acting type and PU225 pilot type. Direct acting type range from 1/8���� to 1����, the timer is available for 3/8���� to 1����, autodrain control, control frequency from 1 to 45 min, drain the water within 1 to 10 senconds. Pilot type range from 3/8���� to 2����, PU series valves are widely used in the air control system and water control system.

VPC European Series Valves

VPC series solenoid valves are popular with customers by the compact design and the such many kinds, the thread size range from 1/8���� to 2����. Suitable for various working pressure, different temperature and many kinds of medium. 2/2, 3/2, normally closed and normally open, pipe connection and flange connection, brass materials and stainless steel materials, direct acting type and pilot type.

2Q Series Air-Control Valve

2Q series solenoid valve take the air as the medium, equiped with the cylinder on the valve body, to open and close by the piston rod of the cylinder. This type valve is mainly used in the place that not suitable for electricity. Oriffice have two options, 22mm and 50mm, the valve body is little bigger. Port size have 1���� and 2����, thread size have 2-G1/8���� and 2-G1/4����, the sealing is PTFE.

SLG Series Solenoid Valve

SLG series solenoid valves have two types, 2/2 and 3/2, NBR and VITON are available, port size are 1/8���� and 1/4����. With many years of the market feedback and improvement of the technology, SLG series valves have strong competition ability in the market, and are accepted by almost the customers and competitors.

SLG5404 Series High-Pressure Solenoid Valve

SLG5404 series high pressure solenoid valve, max working pressure: 75 bar, equiped with the PTFE sealing, the max temperature is up to 150 centidegree. Oriffice have three options, 12mm, 20mm and 25mm, port size have 1/2����, 3/4���� and 1����, Din connector type and flying leads type.

VDF Series Valves used in water

VDF series solenoid valves are used in water, especially for the music fountain control. The in water This series valves has wider and bigger orifice sizes from 15mm to 150mm, depending on the music fountain. Smaller size valves are normally connected by thread from 1/2�� to 2��, and bigger size valves are connected by flanges to make it more stable. VDF valve has very stable function and can work in very dirty condition for long time, Widly used in every corner of the world.

VPC Series Plastic Actuator Anger Valve

VPC series angle valve, stainless steel body materials, equiped with plastic actuator, SS316 and SS304 are available, single acting normally closed and double acting normally open, actuator size range from 40mm to 100mm, port size range from 3/8���� to 2����. Max temperature of the medium is up to 180 centidegree, VPC series angle valve is very popular with the competitive price.

VPCF/VPCYF Series Pulse Valve

VPC series pulse valve can be made up to 3����, widely used in the electrical power, chemical, metallurgy, coloured metal, tobacco and other industries which need the dust cleaning system. Long life for 1 million blow and spray, VPC series pulse valve have the strong competition advantages in excellent quality, competitive price and stable life time

SLC Series Special Valve For Water Fountain

SLC series direct acting water valves are mainly used in the field of water fountain, washing machine, and other drinking system etc. Food level standard products, pipe connection and thread type connection, suitable for different requirements. Oriffice have 2.5mm, 8mm and 9mm, thread sieze range from 1/8���� to 1/4����, The body materials can be made of PP and Nylon, depending on the differernt requirements.

VFCD Series Water Valve

VFCD series water valves are widely used in auto-clean electronic devices, water heater, garden spays, infrared induction sanitary ware, automatic charging waterworks etc. Excellent anti-block design prevent the valve from blocking, female thread type, male thread type and non-thread type. Long working life, the valve body materials can be made of brass and plastic.

K23JD/K25JD Series Single Acting Solenoid Valve

K23JD is the 3/2 single acting check valve, normally open and normally closed are available, oriffice range from 6mm to 50mm, sub-plate mount and flange mount type. J25JD is the 5/2 single acting check valve, normally open and normally closed are available, oriffice range from 10mm to 190mm, the cycle times can be up to 5 millions

G/Q Series Mini Solenoid Valve

G/Q series mini solenoid valves are popular with customers on the delicate shape and rational design, mainly used in the control system of air, water, ink, coffee and other non-corrosive fluid, 2/2 and 3/2, normally open and normally closed, thread size range from M5 to 1/4����, oriffice range from 1.2mm to 5mm, temperature range from 0 centidegree to 120 centidegree.

VAT Series pneumatic actuator

Through research,development and design,VAT series pneumatic actuators incorporate the latest mechanical technology,and innovative ideas.The product proudly boasts the following features: 1.Full conformance to the latest specification:ISO5211.DIN3337,VD/VDE3845and NAMUR. 2.The extruding high intensity aluminum body possess a honed internal surface coated with home anode oxygenation for long life,low coefficient of friction and swift performance. 3.Excellent,compact and modernized construction along with multi-specifications make the selection both economic and beneficial.