Rotary Directional Control Valve – RDL 06

A lever operated rotary type directional control valve is generally used for high pressure applications at low flow. These valves are used where leak-free closure is required.

DOWNLOAD BROUCHER
REQUEST A QUOTE

Lever Operated Directional Control Valve (Old Series) – DL10 ( Series 10 )

Completely encapsulated control mechanism for protection against dirt. Five chamber design. Flexibility in rotating the operating mechanism by 90° x 4. Wide variety of spools available in subplate model only.

Nominal flow and pressure ratings
Model Max. working pr. (bar) Max. flow l/min.
4DL 10 Port P, A and B ….. 350
Port T ……………. 100
100

Lever Operated Directional Control Valve – DL20

Completely encapsulated control mechanism for protection against dirt. Five chamber design. Wide variety of spools available both in subplate and threaded model.

Nominal flow and pressure ratings
Model Max. working pr. (bar) Max. flow l/min.
4DL 20 Port P, A and B ….. 350
Port T (with internal drain) .. 100
Port T (with external drain) .. 250
300

Pilot Operated Directional Control Valve (New Series) – DP 10

Pilot operated directional control valves are hydraulically operated spool valves. They control the start, stop & direction of fluid flow. Available in 19 spool configurations. Available as spring centered and spring offset. Mounts on standard ISO 4401, IS10187.
>

Nominal flow and pressure ratings
Model Max. working pr. (bar) Max. flow l/min.
4DP 10 Port P, A and B …… 350
Port T ………………. 250
Port X and Y ………. 150
120

Lever Operated Pressure Holding D.C.V. – DLS 10, DLS 20

Designed for single acting cylinders which are supposed to hold pressure. Ensures smooth decompression prior to return of the cylinder ram. Large return oil passage to reduce pressure drops, allowing rams to return under low external forces. Valves can be connected in series for independent multiple single acting cylinder operations.

Solenoid Pilot Operated Pressure Holding D.C.V. – DES 10, DES 20

Designed for single acting cylinders which are supposed to hold pressure.
Specially suitable for rubber moulding presses. Ensure smooth decompression prior to return of the cylinder ram. Available as standard & Quick Exhaust. Large return oil passages allows rams to return under low external forces. Valves with quick exhaust feature have 2.34 times larger return passages. Provided with manual opening in case of power failures.
Valves can be connected in series for independent multiple single acting cylinder operations. The valve is actuated by a solenoid controlled pilot.

Flow passage areas Valve Model P to A
P to B
B to T
Standard 4DES20A 3.1 cm² 5.3 cm²
With quick
exhaust feature
4DES20A 3.1 cm² 12.4 cm²
Operating Pressure For ports P, A, B, C, G — 350 bar
For port T ————- 7 bar max.

Solenoid Operated Directional Control Valve (CETOP 03) – DE 06 (315 bar, 63 lpm)

Five chamber body and spool design provides low-pressure drop, with maximum performance. Balanced spool design ensures proper shifting force for maximum reliability and long life. All spools and bodies are interchangable, simplifying maintenance. Wet pin DC solenoids ensure better heat dissipation, quitter operation, there by increasing solenoid life. Moulded solenoid coils eliminate moisture problems and ingress of dust. Plug-in-coils for ease of maintenance. Indicator lights are a standard option.

Solenoid Operated Directional Control Valve (CETOP 05) – DE10-LP (210 bar, 100 lpm)

4-port, spool type, solenoid operated, directional control valves with wet armature AC or DC coils and wide variety of spool types with spring centered and spring-offset arrangements.

  • Five chamber body and spool design to facilitate high flow.
  • Conforms to ISO4401-5, NFPA T3.5.1M R1 and ANSI B93-7 D 05 interface.
  • Available in 52 standard, interchangeable spool configurations.
  • Removable wet-armature AC and DC solenoids for quick replacement and conversions. Moulded solenoid coils to protect against moisture and ingress of dust.

  • Individual solenoid plug-in connectors with indicator lights to ISO 4400 and DIN 43650.

  • Special R-rings for high extrusion resistance. Increased stability under high dynamic condition.
  • Override for operation of valve without electrical power.

Note on solenoid identification : Solenoid “a” is close to Port “A” and Solenoid “b” is close to Port “B” for a direct operated valve.

Solenoid Operated Directional Control Valve (CETOP 05) – DE 10 (315 bar, 120 lpm)

4-port, spool type, solenoid operated, directional control valves with wet armature AC or DC coils and wide variety of spool types with spring centered and spring-offset arrangements.

  • Five chamber body and spool design to facilitate high flow.

  • Conforms to ISO4401-5, NFPA T3.5.1M R1 and ANSI B93-7 D 05 interface.

  • Available in 52 standard, interchangeable spool configurations.
  • Removable wet-armature AC and DC solenoids for quick replacement and conversions. Moulded solenoid coils to protect against moisture and ingress of dust.

  • Individual solenoid plug-in connectors with indicator lights to ISO 4400 and DIN 43650.

  • Special R-rings for high extrusion resistance. Increased stability under high dynamic condition.

  • Override for operation of valve without electrical power.

Note on solenoid identification : Solenoid “a” is close to Port “A” and Solenoid “b” is close to Port “B” for a direct operated valve.

Solenoid Operated Cartridge Directional Control Valve – CDE 06

Solenoid operated cartridge type directional control valve.
Sliding spool construction.

Wet pin solenoids ensure better heat dissipation, quieter operation, there by increasing solenoid life.

Moulded solenoid coils eliminate moisture problems and ingress of dust.

Plug-in-coils for ease of maintenance.

Indicator lights are a standard feature.

Lever Operated Directional Control Valve (CETOP 03) – DL 06

Completely encapsulated mechanism for protection against dirt. Five chamber design for better reduction in dynamic forces and longer valve life. Available as spring centered, spring off-set or detented model. Operating head can be rotated by 90° x 4 around spool axis for flexibility in mounting. Valve mounting interface conforms to ISO 4401-03-02. Five chamber body and spool design provides low-pressure drop, with maximum performance. Balanced spool design ensures proper shifting force for maximum reliability and long life. All spools and bodies are interchangable, simplifying maintenance.

Lever Operated Directional Control Valve (CETOP 03) – DL 06**-11 (New Series)

4-port, spool type, directional control valves with hand lever actuation and wide variety of spool types with spring-centered, spring-offset and detent arrangements.

Pilot Operated Directional Control Valve – DP 20

Pilot operated directional control valves are hydraulically operated spool valves. They control the start, stop & direction of fluid flow. Available in 19 spool configurations. Available as spring centered and spring offset. Mounts on standard ISO 4401, IS10187.

Nominal flow and pressure ratings
Model Max. working pr. (bar) Max. flow l/min.
4DP 20 Port P, A, and B ……. 350
Port T …………………. 250
Port X and Y …………. 150
300

Solenoid Pilot Operated Directional Control Valve – DEP 20

Available as spring centered, spring offset Valve mounting interface conforms to International and National standards. Minimum pilot pressure is 5 bar.

Nominal flow and pressure ratings
Model Max. working pr. (bar) Max. flow l/min.
4DEP20 Port P, A, B and X …………… 350
Port T (with internal drain) … 160
Port T (with external drain) .. 250
Port Y …………………………. 160
300