Learn More

Miniature Pneumatic Cylinder MAL

The output torque and output power of MAL mini cylinder are more stable. Increasing the number of cylinders can make the air car easier to start, and the acceleration response is better. In order to improve the performance of air car, the number of cylinders must be increased.

  • Bore Sizes: 20,25,32,40mm
  • Stroke Lengths: 25,50,75,80,100,125,150,160,175,200,300,500mm
  • Operating Pressure: 0.1-1.0 MPa / 0.2-1.0 MPa
  • Speed:30~500mm/s;50~500mm/s;
  • Working Environment Temperature: -20 to 70°C

Miniature Pneumatic Cylinder CG1

The CG1 Mini Air Cylinder tube is made of high-strength aluminum alloy and is anodized on the surface, corrosion resistance and wear resistance;

  • Standard CDG1-Z single-rod double-acting (new) 20,25,32,40,50,63,80,100
  • Single-acting (telescopic) 20, 25, 32, 40; CG1W-Z double-rod double-acting 20, 25, 32, 40, 50, 63, 80, 100
  • Stroke Lengths: 5,10,15,20,25,30,35,40,45,50,75,100,110,120,130mm
  • Operating Pressure: 0.05-1.0 MPa
  • Speed:30~700mm/s;50~1000mm/s;
  • Working Environment Temperature: -10 to 60°C
Learn More
Learn More

Miniature Pneumatic Cylinder CJP2

CJP2 Miniature Pneumatic Cylinder with bore of φ4-5st can also be equipped with 2 magnetic switches.
Can connect φ2 quick-change connector and speed control valve.

  • Bore Sizes: 6,10,16mm
  • Stroke Lengths: 5,10,15,20,25,30,35,40mm
  • Operating Pressure: 0.06/0.12/0.15-0.7 MPa
  • Speed:10~500mm/s;
  • Working Environment Temperature: -10 to 60°C

Mini Pneumatic Cylinder CJ1 (Stainless Steel)

CJ1 Stainless Steel Cylinder is double-acting type, and the piping direction of the side pipe joint can be changed within ±90º.
It is miniature compact cylinder (Stainless Steel Cylinder) with compact structure, small size and light weight;

  • Bore Sizes: 2.5,4mm
  • Stroke Lengths: 5,10,15,20mm
  • Operating Pressure: 0.3-0.7 MPa
  • Speed:50~500mm/s;
  • Working Environment Temperature: -10 to 70°C
Learn More
Learn More

Mini Pneumatic Cylinder CJ2 (Stainless Steel)

CJ2 Cylinder is a kind of double acting cylinders, various installation forms are available. With Rubber bumper or air cushion. No lubrication is needed. Cylinder material is 304, 316 stainless steel.

  • Bore: 6, 10, 16mm
  • Motion Pattern: double-acting, single-acting
  • Working Medium: Air, Non-lube
  • Operating pressure: 0.06~0.7MPa
  • Ambient and fluid temperature: -10~70°C (No Freezing);
  • Piston speed: 50~750mm/s

Mini Pneumatic Cylinder CM2 (Stainless Steel)

CM2 Mini Cylinder piston adopts a combined sealing ring to realize two-way sealing, and the piston and the piston rod are riveted together without using a nut.

  • Bore: 20, 25, 32, 40mm
  • Stroke length: 300mm
  • Operating pressure: 0.7MPa
  • Piston speed: 50~750mm/s
  • Ambient and fluid temperature: -10~+70°C
Learn More
Learn More

Mini Pneumatic Cylinder MI (Stainless Steel)

MI Mini cylinder, front and rear cover with fixed anti-collision pad, can reduce the reversing impact of the cylinder; a variety of back cover forms, so that the installation of the cylinder more convenient.

  • Bore: 8, 10, 12, 16, 20, 25mm
  • Stroke length: 0~500mm
  • Operating pressure: 0.1~1.0MPa(Double-acting); 0.2~1.0MPa(Single-acting)
  • Piston speed: 50~750mm/s
  • Ambient and fluid temperature: -20~+70°C

Mini Pneumatic Cylinder MA (Stainless Steel)

The piston seal of MA Mini Cylinder adopts special-shaped two-way sealing structure, has compact size and oil storage function; The front and rear covers of the MA Mini Cylinder have the fixed anti-collision pad to reduce reversal impact.

  • Bore: 16, 20, 25, 32, 40, 50, 63mm
  • Stroke length: 25~500mm
  • Operating pressure: 0.1~1.0MPa(Double-acting); 0.2~1.0MPa(Single-acting)
  • Piston speed: Single-acting: 50~800mm/s; Double-acting: 30~800mm/s
  • Ambient and fluid temperature: -20~+70°C
Learn More

Micro Air Cylinder CJP

CJP Pin Cylinder has a compact brass body with an unthreaded stainless-steel piston rod, and it has panel mounting for installation through walls or panels. The CJP Mini Air Cylinder has panel mounting and comes with both mounting and rod end nuts for installations through walls or panels.

  • Bore: 4, 6, 10, 15mm
  • Stroke length: 5, 10, 15mm
  • Operating pressure: 0.2~0.7MPa
  • Piston speed: 50~500mm/s
  • Ambient and fluid temperature: -10~+70°C
Learn More